Other materials / Stencil Foil & Stencil / Signmask Stencil - Flat & Curved
Self-adhesive Stencil Signmask - Light Blue
Self-adhesive stencil film on flat and curved surfaces (non repositionable).
Once the stencil film has been applied to the substrate using the transfer film, allow the adhesive to "sit" for at least 5 minutes before removing the transfer film, to prevent small details of the film being washed away by the transfer film.
When the transfer film is removed, iron the squeegee around the edges of the stencil film to reinforce the adhesion of the edges and to obtain an area with perfectly sharp edges.
Let it run for 30 minutes so that the adhesive has time to set sufficiently before applying the paint.
At the time of spraying, the solvent content of the paint can be very high. These solvents are sometimes very aggressive. We recommend that you first spray a thin layer of paint, especially around the edges, and allow it to dry for 2 to 3 minutes, the edges of the stencil will be welded. Then spread the necessary layer (s) of paint.
The stencil film must be removed within a maximum of 24 hours after its application.
Self-adhesive stencil film on flat and curved surfaces (non repositionable).
- Avery Dennison
- Dimension: 24,6cm x 10m of 30.75 cm x 10 m
- Ultra removable
- Thickness 80 microns
- On flat AND curved surfaces
- Ideal for small smooth surfaces such as phone cases, motorcycle helmets, etc ...
- Ideal for airbrush!
Once the stencil film has been applied to the substrate using the transfer film, allow the adhesive to "sit" for at least 5 minutes before removing the transfer film, to prevent small details of the film being washed away by the transfer film.
When the transfer film is removed, iron the squeegee around the edges of the stencil film to reinforce the adhesion of the edges and to obtain an area with perfectly sharp edges.
Let it run for 30 minutes so that the adhesive has time to set sufficiently before applying the paint.
At the time of spraying, the solvent content of the paint can be very high. These solvents are sometimes very aggressive. We recommend that you first spray a thin layer of paint, especially around the edges, and allow it to dry for 2 to 3 minutes, the edges of the stencil will be welded. Then spread the necessary layer (s) of paint.
The stencil film must be removed within a maximum of 24 hours after its application.
Ask a question about this product
Your question has been sent! Thank you.
We will provide you with an answer as soon as possible.
